This is MyLocoSound's third generation of low cost soundcards for large scale railways. Like their predecessors, the steam, diesel and electric soundcards are highly adjustable to suit a wide variety of US, European and other locomotives. However, a number of major improvements have been made based on feedback from customers over the past seven years. Our latest version, recognisable by its blue circuit board, is now available.
MyLocoSound Universal is physically smaller than its predecessor, it retains the installation simplicity of screw terminals and also the same low price. However the quality and variety of sounds has been improved. A bell, an airbrake release, a turbocharger, "All aboard", a guard's whistle, brake squeal, engine start, seven types of horn and seven engine types are included in all versions of the diesel soundcard.

For European locomotives and railcars there is an adjustable two tone horn with an option to play tunes on it using two buttons. For elsewhere there is a narrow gauge/industrial horn plus modern horns from the US and Australasia. On all of them the pitch and volume is adjustable using our TV remote control. A load sensitive engine sound is provided which is loud when accelerating, softens when coasting and is softer still when slowing down. Options are included for a mechanical gear change and "notching up".
Previous MyLocoSound products have used purely synthesised sound to produce a low cost soundcard which is readily adjustable. To achieve greater realism, but still at the low price, MyLocoSound Universal uses a blend of recorded sounds from actual locos with the adjustability of synthesised sound.

Whilst itís great to have a highly adjustable soundcard, the benefit is lost if you have to take the locomotive apart each time you want to make an adjustment. MyLocoSound has solved this problem by providing a handheld remote control which is used to make all adjustments from outside the locomotive. These are Sony compatible TV remote controls which can be purchased from local consumer electronics stores or from MyLocoSound at very little cost. Only one remote control is needed for any number of locomotives.

All of the sounds can be triggered by the function buttons of the Crest Revolution or the multi-channel radio control systems from RCS, Peter Spoerer, Micron, Mtronics, Mac 5, Cliff Barker, RailBoss, Airwire and others.
MyLocoSound Universal also works well with simple track powered railways. On these, the sounds can be triggered in three ways. Firstly, the diesel horn can be set to sound automatically when the loco moves off and at timed intervals when running. Secondly, trackside magnets and loco mounted reed switches can trigger any of the sounds at selected positions on the railway. Thirdly the remote control can be used to trigger any of the sounds but only from short distances.

On track powered railways, each locomotive needs a nine volt support battery on board to sustain the sound when the track voltage is reduced to stop at a station. This battery will recharge automatically when the loco is running.

To find out more please download the instructions for the diesel soundcard................
Click here for the British diesel instructions

Diesel soundcards for large scale, outdoor railways in G scale, Gauges 1 and 3 and ride on railways ... enhanced blue version now available.

Click here for the North American diesel instructions
Click here for the Australasian diesel instructions
The Pete Spoerer Video Collection
View full screen in YouTube
Click here for sample sounds